南京睿督公司与美国A2LA资质实验室－ELEMENT实验室合作，提供ASTM美标权威性能检测，Scope of accreditation to ISO/IEC 17025:2017，咨询电话：025-86583475，网址：www.fire-test.cn   

ASTM B117 Standard Practice for Operating Salt Spray (Fog) Apparatus

ASTM B487 Test Method for Metal and Oxide Coating Thickness by Microscopical Examination of a Cross Section

ASTM C20 Standard Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water

ASTM C271 Test Method for Density of Sandwich Core Materials

ASTM C273 Test Method for Shear Properties in Flatwise Plane of Flat Sandwich Constructions or Sandwich Cores

ASTM C297 Test Method for Tensile Strength of Flat Sandwich Constructions in Flatwise Plane

ASTM C363 Test Method for Node Tensile Strength of Honeycomb Core Materials

ASTM C364 Test Method for Edgewise Compressive Strength of Flat Sandwich Constructions

ASTM C365 Test Methods for Flatwise Compressive Strength of Sandwich Cores

ASTM C373 Determination of Water Absorption and Associated Properties by Vacuum Method for Pressed Ceramic Tiles and Glass Tiles and Boil Method for Extruded Ceramic Tiles and Non-tile Fired Ceramic Whiteware Products

ASTM C393 Test Method for Flexural Properties of Flat Sandwich Constructions

ASTM C394 Standard Test Method for Shear Fatigue of Sandwich Core Materials

ASTM C1166 Test Method for Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories

ASTM C1275 Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature

ASTM C1359 Standard Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross Section Test Specimens at Elevated Temperatures

ASTM D149 Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies

ASTM D150 Test Methods for A-C Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulating Materials

ASTM D229 Rigid Sheet and Plate Materials Used for Electrical Insulation

ASTM D256 Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics

ASTM D257 Test Methods for D-C Resistance or Conductance of Insulating Materials

ASTM D297 Test Method for Rubber Products – Chemical Analysis (Section 16.3)

ASTM D395 Rubber Property—Compression Set

ASTM D412 Test Methods for Vulcanized Rubber and Thermoplastic Rubbers and Thermoplastic Elastomers- Tension

ASTM D471 Test Method for Rubber Property-Effect of Liquids (Section 15 only)

ASTM D495 Test Method for High-Voltage, Low-Current, Dry Arc-Resistance of Solid Electrical Insulation

ASTM D568 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Flexible Plastics in a Vertical Position

ASTM D570 Test Method for Water Absorption of Plastics

ASTM D575 Test Methods for Rubber Properties in Compression

ASTM D618 Conditioning of Plastics for Testing

ASTM D621-64(88)2 Test Methods for Deformation of Plastics Under Load (Withdrawn 1994)

ASTM D624 Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers (Die B & C)

ASTM D635 Test Method for Rate of Burning and/or Extent and Time Burning of Self-Supporting Plastics in a Horizontal Position

ASTM D638 Test Method for Tensile Properties of Plastics

ASTM D646 Mass Per Unit Area of Paper and Paperboard of Aramid Papers (Basis Weight)

ASTM D648 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position

ASTM D695 Test Method for Compressive Properties of Rigid Plastics

ASTM D732 Test Method for Shear Strength of Plastics by Punch Tool

ASTM D747 Apparent Bending Modulus of Plastics by Means of a Cantilever Beam

ASTM D785 Rockwell Hardness of Plastics and Electrical Insulating Materials

ASTM D790 Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials

ASTM D792 Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement (Method A)

ASTM D877 Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes

ASTM D882 Test Methods for Tensile Properties of Thin Plastic Sheeting

ASTM D897 Standard Test Method for Tensile Properties of Adhesive Bonds

ASTM D903 Test Method for Peel or Stripping Strength of Adhesive Bonds

ASTM D924 Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) or Electrical Insulating Liquids

ASTM D952 Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials

ASTM D953 Test Method for Bearing Strength of Plastics

ASTM D991 Test Method for Rubber Property-Volume Resistivity of Electrically Conductive and Antistatic Products

ASTM D1002 Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)

ASTM D1004 Test Method for Initial Tear Resistance of Plastic Film and Sheeting

ASTM D1043 Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test

ASTM D1169 Test Method for Specific Resistance (Resistivity) of Electrical Insulating Liquids

ASTM D1200 Standard Test Method for Viscosity by Ford Viscosity Cup

ASTM D1238 Test Method for Flow Rates of Thermoplastics by Extrusion Plastometer (Method A)

ASTM D1298 Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method

ASTM D1329 Test Method for Evaluating Rubber Property-Retraction at Lower

Temperatures (TR Test)

ASTM D1364 Standard Test Method for Water in Volatile Solvents (Karl Fischer Reagent Titration Method)

ASTM D1414 Standard Test Methods for Rubber O-Rings

ASTM D1621 Test Method for Compressive Properties of Rigid Cellular Plastics

ASTM D1622 Test Method for Apparent Density of Rigid Cellular Plastics

ASTM D1623 Test Method for Tensile and Tensile Adhesion Properties of Rigid

Cellular Plastics

ASTM D1708 Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens

ASTM D1781 Test Method for Climbing Drum Peel for Adhesives

ASTM D1824 Test Method for Apparent Viscosity of Plastisols and Organosols at Low

Shear Rates

ASTM D1876 Test Method for Peel Resistance of Adhesives (T-Peel Test)

ASTM D1938 Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by Single-Tear Method

ASTM D2095 Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens

ASTM D2126 Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging

ASTM D2240 Test Method for Rubber Property-Durometer Hardness (Shore A & D)

ASTM D2295 Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)

ASTM D2344 Test Method for Apparent Interlaminar Shear Strength of Parallel Fiber Composites by Short-Beam Method

ASTM D2520 Test Method for Complex Permittivity (Dielectric Constant) of Solid Electrical Insulating Materials at Microwave Frequencies and Temperatures to 1650 ?C

ASTM D2557 Test Method for Tensile-Shear Strength of Adhesives in the Subzero Temperature Range from (-267.8 to -55) ?C or (-450 to -67)F

ASTM D2583 Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor

ASTM D2584 Test Method for Ignition Loss of Cured Reinforced Resins

ASTM D2734 Void Content of Reinforced Plastics

ASTM D2857 Standard Practice for Dilute Solution Viscosity of Polymers

ASTM D2919 Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading

ASTM D3039 Test Method for Tensile Properties of Polymer Matrix Composite Materials

ASTM D3163 Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading

ASTM D3164 Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading

ASTM D3165 Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies

ASTM D3166 Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal)

ASTM D3167 Test Method for Floating Roller Peel Resistance of Adhesives

ASTM D3171 Test Method for Fiber Content of Resin-Matrix Composites by Matrix Digestion (Method A, B, and G)

ASTM D3330 Test Method for Peel Adhesion of Pressure-Sensitive Tape

ASTM D3359 Test Methods for Measuring Adhesion by Tape Test

ASTM D3386-002 Test Method of Coefficient of Linear Thermal Expansion of Electrical Insulating Materials (Withdrawn 2005)

ASTM D3410/3410M Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading

ASTM D3417-992 Test Method for Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry (DSC) (Withdrawn 2004)

ASTM D3418 Test Method for Transition Temperatures of Polymers by Thermal Analysis

ASTM D3433 Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints

ASTM D3479 Test Methods for Tension-Tension Fatigue of Oriented Fiber, Resin Matrix Composites

ASTM D3518 Practice for In-Plane Shear Stress-Strain Response of Unidirectional Polymer Matrix Composite Materials by Tensile Test of ±45 Laminate

ASTM D3528 Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading

ASTM D3529 Test Method for Resin Solids Content of Epoxy-Matrix Prepreg by Matrix Dissolution

ASTM D3530 Test Method for Volatiles Content of Epoxy-Matrix Prepreg

ASTM D3531 Test Method for Resin Flow of Carbon Fiber-Epoxy Prepreg

ASTM D3532 Test Method for Gel Time of Carbon Fiber-Epoxy Prepreg

ASTM D3552 Standard Test Method for Tensile Properties of Fiber Reinforced metal Matrix Composites

ASTM D3759 Test Method for Breaking Strength and Elongation of Pressure Sensitive Tape

ASTM D3776 Standard Test Method for Mass Per Unit Area (Weight) of Fabric

ASTM D3846 Test Method for In-Plane Shear Strength of Reinforced Plastics

ASTM D3850 Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials by Thermogravimetric Method

ASTM D3895 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry

ASTM D3914 Standard Test Method for In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod

ASTM D3916 Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod

ASTM D4065 Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures

ASTM D4255 In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method

ASTM D4475 Test Method for Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods by the Short-Beam Method

ASTM D4496 Test Method for D-C Resistance or Conductance of Moderately Conductive Materials

ASTM D4591 Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry

ASTM D4804 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics

ASTM D4812 Standard Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics

ASTM D5023 Test Method for Plastics: Dynamic Mechanical Properties: In Flexure

(Three-Point Bending)

ASTM D5024 Test Method for Plastics: Dynamic Mechanical Properties: In Compression

ASTM D5026 Test Method for Plastics: Dynamic Mechanical Properties: In Tension

ASTM D5035 Breaking Force and Elongation of Textile Fabrics (Strip Method)

ASTM D5083 Tensile Properties of Reinforced Thermosetting Plastics Using Straight Sided Specimens

ASTM D5229 Standard Test Method for Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite Materials

ASTM D5379 Test Method for Shear Properties of Composite Materials by the V- Notched Beam Method

ASTM D5420 Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)

ASTM D5467 Test Method for Compressive Properties of Unidirectional Polymer Matrix Composites Using a Sandwich Beam

ASTM D5528 Mode I Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composite

ASTM D5628 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)

ASTM D5656 Test Method for Thick Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading

ASTM D5766 Open Hole Tensile Strength of Polymer Matrix Composite Laminates

ASTM D5868 Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding

ASTM D5961 Test Method for Bearing Response of Polymer Matrix Composite Laminates

ASTM D6110 Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics

ASTM D6264 Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force

ASTM D6267 Standard Test Method for Apparent Viscosity of Hydrocarbon Resins at Elevated Temperatures

ASTM D6272 Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending

ASTM D6413 Flame Resistance of Textiles (Vertical Test)

ASTM D6415 Test Method for Measuring the Curved Beam Strength of a Fiber Reinforced Polymer Composite

ASTM D6484 Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates

ASTM D6641 Test Method for Determining the Compressive Properties of Polymer Matrix Composite Laminate Using a Combined Loading Compression (CLC) Test Fixture

ASTM D6671 Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites

ASTM D6742 Filled Hole Tension and Compression Testing of Polymer Matrix Composites

ASTM D6862 90 Degree Peel Resistance of Adhesives

ASTM D6869 Standard Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water)

ASTM D7028 Test Method for Glass Transition Temperature (DMA Tg) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA)

ASTM D7078 Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method

ASTM D7136 Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event

ASTM D7137 Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates

ASTM D7248 Standard Test Method for Bearing/Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens

ASTM D7249 Test Method for Facing Properties of Sandwich Constructions by Long Beam Flexure

ASTM D7250 Practice for Determining Sandwich Beam Flexural and Shear Stiffness

ASTM D7264 Test Method for Flexural Properties of Polymer Matrix Composite

Materials

ASTM D7291 Test Method for Through-Thickness "Flatwise" Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material

ASTM D7332 Test Method for Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite

ASTM D7426 Test Method for Assignment of the DSC Procedure for Determining Tg of a Polymer or an Elastomeric Compound

ASTM D7565 Determining Tensile Properties of Fiber Reinforced Polymer Matrix Composites Used for Strengthening of Civil Structures

ASTM D7615/ASTM D7615M Standard Practice for Open-Hole Fatigue Response of Polymer Matrix Composite Laminates

ASTM D7616 Apparent Overlap Splice Shear Strength Properties of Wet Lay-Up Fiber-Reinforced Polymer Matrix Composites Used for Strengthening Civil Structures

ASTM D7766 Damage Resistance Testing of Sandwich Constructions

ASTM D7905 Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites

ASTM D7956 Standard Practice for Compressive Testing of Thin Damaged Laminates Using a Sandwich Long Beam Flexure Specimen

ASTM E3 Practice for Preparation of Metallographic Specimens

ASTM E8 Standard Test Methods for Tension Testing of Metallic Materials

ASTM E18 Rockwell Hardness of Metallic Materials

ASTM E595 Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment

ASTM E662 Test Method for Specific Optical Density of Smoke Generated by Solid Materials

ASTM E831 Test method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis

ASTM E990 Standard Specifications for Core-Splice Adhesive for Honeycomb Sandwich Structural Panels (Except Water Migration)

ASTM E1131 Test Method for Compositional Analysis by Thermogravimetry

ASTM E1252 Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis

ASTM E1269 Determining Specific Heat Capacity by DSC

ASTM E1356 Test Method for Glass Transition Temperatures by Differential Scanning Calorimetry or Differential Thermal Analysis (DSC Only)

ASTM E1545 Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis

ASTM E1640 Test Method for Assignment of the Glass Transition Temperature by DMA

ASTM E1952 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry

ASTM E2004 Test Method for Facing Cleavage of Sandwich Panels

ASTM E2160 Standard Test Method for Heat Reaction of Thermally Reactive Materials by Differential Scanning Calorimetry

ASTM F814-84b2 Test Method for Specific Optical Density of Smoke Generated by Solid Materials for Aerospace Applications (Withdrawn 1995)

ASTM G154 Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials

BS EN 2564 Aerospace Series-Carbon Fibre Laminates-Determination of Fibre, Resin, and Void Contents

BS EN 6032 Aerospace Series-Fibre Reinforced Plastics-Test Method- Determination of the Glass Transition Temperatures

BS EN 6033 Aerospace Series-Carbon Fibre Reinforced Plastics-Test Method- Determination of Interlaminar Fracture Toughness Energy -Model I-GIC

BS EN 6034 Aerospace Series-Carbon Fibre Reinforced Plastics-Test Method-Determination of Interlaminar Fracture Toughness Energy -Model II- GIIC

BS EN 6040 Aerospace Series – Non-Metallic Materials – Test Method – Analysis of Thermoset Systems by High Performance Liquid Chromatography (HPLC)-Qualitative Only

ISO 178 Plastics-Determination of Flexural Properties

ISO 179 Plastics-Determination of Charpy Impact Properties-Part 1: Non-instrumental Impact Test

ISO 527 Plastics-Determination of Tensile Properties

ISO 760 Determination of Water-Karl Fischer Method

ISO 844 Rigid Cellular Plastics-Determination of Compression Properties

ISO 1817 Rubber, Vulcanized or Thermoplastic-Determination of the Effect of Liquids

ISO 1926 Rigid Cellular Plastics-Determination of Tensile Properties

ISO 14125 Fibre-Reinforced Plastic Composites-Determination of the Flexural Properties

ISO 14126 Fibre-Reinforced Plastic Composites-Determination of Compressive Properties in the In-Plane Direction

ISO 14129 Fibre-Reinforced Plastic Composites-Determination of the In-Plane Shear Strain Response, including the In-Plane Shear Modulus and Strength by the ±45 Tension Test Method

DOT FMVSS 302 Department of Transportation Motor Vehicle Safety Standard Flammability of Interior Materials

FAA:FAR 25.853 Airworthiness Standards: Transport Category Airplanes, Fire Protection, Compartment Interiors, Appendix F, Part I, IV, and V

Boeing:

BSS 7230 Determination of Flammability Properties of Aircraft Materials

BSS 7238 Test Method for Smoke Generation by Materials on Combustion

BSS 7239 Test Method for Toxic Gas Generation by Materials on Combustion

BSS 7322 Boeing Specification Support Standard, Ohio State University Calorimeter Heat Release, Determination of

Airbus:

AITM 2.0002 Resistance of Materials When Tested According to the 12 s or 60 s Vertical Bunsen Burner Test

AITM 2.0003 Flammability of Non-metallic Materials, - Small Burner Test, Horizontal

AITM 2.0004 Flammability of Non-metallic Materials, - Small Burner Test, 45 degrees

AITM 2.0005 Flammability of Non-metallic Materials, - Small Burner Test, 60 degrees

AITM 2.0006 Determination of Heat Release and Heat Release Rate of Aircraft Materials

AITM 2.0007 Determination of Specific Optical Smoke Density of Component Parts or Sub-Assemblies of Aircraft Interior

AITM 2.0008 Determination of Specific Optical Smoke Density of Wire/Cable Insulation

AITM 2.0038 Flammability of Heat Shrinkable Tubing’s, - Small Burner Test, 60 degrees

AITM 3.0005 Determination of Specific Gas Components of Smoke Generated by Component Parts or Sub-Assemblies of Aircraft Interior

Military Standards:

MIL-STD-810 Environmental Engineering Considerations and Laboratory Tests:

Method 501 High Temperature

Method 502 Low Temperature

Method 507 Humidity

MIL-STD-202 Test Methods for Electronic and Electrical Component Parts:

Method 103 Humidity (Steady State)

Method 104 Immersion (Method A)

Method 108 Life (at Elevated Ambient Temperature)

Method 301 Dielectric Withstanding Voltage

Method 302 Insulation Resistance

Method 303 DC Resistance SACMA (Suppliers of Advanced Composite Materials Association):

SRM 1-94 Compressive Properties of Oriented Fiber-Resin Composites

SRM 2-94 Compression After Impact Properties of Oriented Fiber-Resin Composites

SRM 3-94 Open-Hole Compression Properties of Oriented Fiber-Resin Composites

SRM 4-94 Tensile Properties of Oriented Fiber-Resin Composites

SRM 2R-94 Compression After Impact Properties of Oriented Fiber-Resin Composites

SRM 5-94 Open-Hole Tensile Properties of Fiber-Resin Composites

SRM 6-94 Compressive Properties of Oriented Cross-Plied Fiber-Resin Composites

SRM 7-94 In-Plane Shear Stress-Strain Properties of Oriented Fiber-Resin Composites

SRM 8-94 Short Beam Shear Strength of Oriented Fiber-Resin Composites

SRM 9-94 Tensile Properties of Oriented Cross-Plied Fiber-Resin Composit e

SRM 10R-94 Fiber Volume, Percent Resin Volume and Calculated Average Cured Ply Thickness of Plied Laminates

SRM 11R-94 Environmental Conditioning of Composite Test Laminates

SRM 18R-94 Glass Transition Temperature (Tg) Determination By DMA

SRM 21R-94 Fluid Resistance Evaluating of Composite Materials

SRM 22R-94 Determining the Resin Flow of Preimpregnated “B” Staged Material

SRM 23R-94 Determination of Resin Content and Fiber Areal Weight of Thermoset Prepreg with Destructive Techniques

SRM 25R-94 Onset Temperature and Peak Temperature for Composite Resin Systems Using Differential Scanning Calorimetry (DSC)

Sikorsky

SS9152/PP101 Determination of Glass Transition Temperature by DMA, Single Cantilever Method

SAE (Society of Automotive Engineers)

SAE J2253 Test Procedures for Automotive Structural Composite Materials (Formerly ACCM-T-02)

Section 8.2 Specific Gravity

Section 8.3 – 8.5 Resin/Filler/Void Content

Section 9.2 DMA

Section 10 Tensile Testing

Section 11 Compressive Testing

Section 1Shear Testing

ASTM B987 Standard Specification for Carbon Fiber Composite Core (CFCC/TS) for use in Overhead Electrical Conductors

ASTM D876 Electrical Insulation

ASTM D1414 Test Methods for Rubber O-Rings

ASTM D1675 Standard Test Methods for Polyetrafluothylene Tubing

ASTM D4745 Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials

ASTM D4762 Standard Guide for Testing Polymer Matrix Composite Materials

ABD 0031 Fireworthiness Requirements Pressurized Section of Fuselage

BOEING D6-51377 Airplane Fire Worthiness Design Criteria-Pressurized Compartments

IPC-CC-830 Qualification and Performance of Electrical Insulating Compound for Printed Board Assemblies

MIL-I-46058 General Specification for Insulating Compound, Electrical

(For Coating Printed Circuit Assemblies) (Except Fungus)

MMM-A-132 Federal Specification for Adhesives, Heat Resistant, Airframe Structural, Metal-to-Metal

NASA 1092 Standard Tests for Toughened Resin Composites

NASA 1142 NASA/Aircraft Industry Standard Specification for Graphite Fiber-Toughened Thermoset Composite Materials

ASTM C1275 Standard Test Method for Monotonic Tensille Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature

ASTM C1337 Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Advanced Ceramics Under Tensile Loading at Elevate Temperatures

ASTM C1359 Standard Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross Section Test Specimens at Elevated Temperatures

ASTM C1360 Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures

ASTM C1361 Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Advance Ceramics at Ambient Temperature

ASTM D3039 Test Method for Tensile Properties of Polymer Matrix Composite Materials

南京睿督公司专业从事建材及轨道车辆材料防火烟毒检测十多年，欧盟公告号及UKAS资质实验室的授权合作实验室，为您提供专业权威的测试认证咨询

南京睿督公司免费咨询电话：400-603-6575   025-8658 3475
网址：www.fire-test.com      www.fire-test.cn 
Email：info@fire-test.com   

…