ULC CAN/ULC S705.1 Standard for Thermal Insulation-Spray Applied Rigid Polyurethane Foam, Medium Density-Material-Specification
ULC CAN/ULC S705.1 保温绝缘材料标准－喷涂硬质聚氨酯泡沫塑料,中密度－材料－规范 

CAN/ULC S705.2 Standard for Thermal Insulation - Spray Applied Rigid Polyurethane Foam, Medium Density - Application (CAN/ULC S705.2-05)
CAN/ULC S705.2 绝缘保温标准-喷涂硬质聚氨酯泡沫塑料,中密度-安装程序

1. CAN/ULC S705.1标准适用范围

1.1  This Standard specifies the requirements and test methods for spray-applied rigid polyurethane cellular plastics, medium density, used as a thermal insulation for both building and non-building applications, whether applied on a building site or in a prefabrication (manufacturing) facility. The material is also known as foamed in-situ insulation .

1.2  The spray-applied rigid polyurethane cellular plastic thermal insulation shall not be used when the continuous service temperature of the substrate is outside the range of -60 to +80 ° C.

1.3  The test methods used to determine the material properties provide a means of comparing different cellular plastic thermal insulations. They are intended for use in specifications, product evaluations and quality control. They are not intended to predict end-use product performance.

1.4  Spray-applied rigid polyurethane cellular plastic thermal insulation-medium density must be applied (installed) in accordance with the manufacturer's instructions and CAN/ULC-S705.2, Thermal Insulation - Spray Applied Rigid Polyurethane Foam, Medium Density, Application - Specification by a licensed contractor using a licensed installer for the actual application. Applications, requirements for applications and limitations of use are included in CAN/ULC-S705.2.

1.5  The testing and evaluation of a product against this Standard may require the use of materials and/or equipment that could be hazardous. This document does not purport to address all the safety aspects associated with its use. Anyone using this Standard has the responsibility to consult the appropriate authorities and to establish appropriate health and safety practices in conjunction with any existing applicable regulatory requirements prior to its use.

我们还提供各种加拿大防火阻燃测试

加拿大CAN/ULC S102/135认证 http://www.firete.com/popular_standards/7922.html
CAN/ULC-S134  http://www.firete.com/popular_standards/7923.html
CAN/ULC-S102火焰表面燃烧测试        http://www.firete.com/popular_standards/7647.html
CAN/ULC-S102.2地板表面燃烧特性测试  http://www.firete.com/popular_standards/8061.html
CAN/ULC-S101耐火测试方法            http://www.firete.com/popular_standards/8054.html
CAN/ULC-S104-10防火门及组件耐火测试http://www.firete.com/popular_standards/8068.html 
CAN/ULC-S127不熔建筑材料燃烧特性测http://www.firete.com/popular_standards/8071.html 

南京睿督公司全国免费咨询电话：025-8658 3475  400-603-6575
网址：www.fire-test.com  
邮箱：info@fire-test.com

...