ASTM C411 Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation
ASTM C411 高温隔热材料受热面性能的标准试验方法

Performance in service is the final measure of value for a thermal insulation, but simulative service tests give useful indications. One type involves application for a specified time to a surface heated at a temperature approximately that of intended service, and noting during the test and afterward, changes in the material and its properties. Measurement of these changes are used for predicting what occurs in service as a result of exposure to temperatures corresponding to those of the tests.

1. ASTM C411标准适用范围

1.1 This test method covers the determination of the performance of commercial sizes of both block and pipe forms of thermal insulating materials when exposed to simulated hot-surface application conditions. The term “hot-surface performance” has reference to a simulated use-temperature test in which the heated testing surface is in a horizontal position.

1.2 This test method refers primarily to high-temperature insulations that are applicable to hot-side temperatures in excess of 200°F (93°C). It is used for materials such as preformed insulations, insulating cements, blankets, and the like, by proper laboratory preparation of the samples.

1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. ASTM C411参考标准

ASTM C168 Terminology Relating to Thermal Insulation

Index Terms

cracking; delamination; high temperature insulation; hot-surface performance; sag; temperature tests; thermal insulating materials; warpage: Block and pipe thermal insulation; Cracking--insulation; Delamination; Hot-surface testing/evaluation; Pipe thermal insulation; Surface analysis--building construction materials/insulation; Temperature tests--thermal insulation; Thermal insulating materials; Warpage;

更多ASTM美国防火阻燃测试认证，请咨询南京睿督公司
电话：400-666-7290  025-8658 3475
网址：www.fire-test.com
邮箱：info@fire-test.com

...